Graphic version of this page | Change how these pages look
[Image - Print Strength Bandwidth]
Home
RSQ discussion
RSQ Reporting Table
Using RSQ on air
IARU Reg. 1 recommendation
IARU Reg. 1 recommendation 2
IARU Reg. 3 recommendation
IARU Region 2 status
Station setup checklist
IMD Measurement
Signal trace samples
PSK signal modelling
About RSQ
Feedback
Newsletters
Mailing list
IARU Region 3 recommendation
August 2006: IARU Region 3 adopts RSQ signal reporting
The IARU Region 3 conference in Bangalore has also adopted the RSQ signal reporting table for the HF digital modes. The proposal was put by the Wireless Institute of Australia (WIA) and the meeting resolved as follows:
13th IARU Region 3 Conference, Bangalore 2006
Report to Plenary Meeting from Working Group 2
Operational and Technical Matters
Document 032 Report on RSQ reporting for digital modes below 30 MHz by WIA
The committee took it as recommendation. Addition of "wherever applicable" above 30 MHz was suggested. ARRL supported the recommendation.
Recommendation WG2-5:
It is recommended that RSQ reporting be used for digital modes below 30 MHz.
The
- complete Working Group 2 minutes
- proposal paper submitted by the Wireless Institute of Australia
can be viewed by downloading the articles from the links below.
Downloads
IARU R3 adoption of RSQ reporting (0.06 MB)
WIA RSQ Paper to IARU R3 meeting Aug 06 (0.04 MB)
[Image - Print Strength Bandwidth]
Have you subscribed to our mailing list? If not and would like to, click
here
Would you like to give us some feedback about RSQ? If so, click
here
Many thanks!
73, the development team.
Website sponsored by Sitekit
Solutions Ltd: powered by
SiteKit